Daily
Amenities, offices, lunchrooms and dock areas. Busy sites may also need the pick aisles scrubbed on the same cycle.
Warehouse & Industrial Cleaning in Melbourne
Your cleaning contract probably lists racking dust. The question is whether the quote ever said how anyone would reach the top beam. Ours does: every job above floor level is quoted with the access method named.
Floors, racking, plant areas and amenities, cleaned around your forklift traffic with a plan agreed before we start. We work seven days, between 6am and 10pm, and plan heavy work into your shutdown windows.
- Access method named on every height job
- Cleaned around live forklift traffic, not through it
- SWMS and site risk assessment before the first clean
- 6am to 10pm
- Seven days, plus a 24-hour emergency line
- We stay until you're happy
- Our guarantee on every clean
- $10M
- Public liability insurance
- Free quotes
- Fixed before we start
What does warehouse and factory cleaning in Melbourne include?
Scheduled cleaning of floors, racking, amenities and plant areas, written as a scope with frequencies rather than a rate per square metre.
A shed is not a big office. Floor scrubbing, degreasing and high level dusting each need different equipment, and high level work means working above floor level.
Height is the part many quotes skip. If a contractor cannot tell you how they will reach the top beam, they have not priced the job they are quoting.
Attached office space is scoped alongside it. See office cleaning in Melbourne, and for outdoor hardstand see pressure washing.
How often should a warehouse be cleaned?
Floor work and height work usually run on different cycles.
Scheduled periodic
Full slab scrub, racking dust and high level work, booked into the calendar so it stops being the job nobody gets around to.
Shutdown windows
Christmas, stocktake and planned maintenance. The only time some areas can be reached at all, so they book out early.
Height work rarely fits around a running shift. We plan it against your shutdown calendar rather than squeezing it between forklift runs.
How do we work around a live site?
Your site rules, not ours, agreed before anyone starts.
Contact us-
Step 01
Site induction
Your induction, your rules and your emergency procedures before the first clean.
-
Step 02
Traffic management agreed
Exclusion zones, spotters and which aisles stay live while we work.
-
Step 03
Height work agreed
Access method agreed in writing, with the work stopped if conditions change on the day.
-
Step 04
Recorded and reported
Attendance and a photo report each visit, with anything unsafe reported to your supervisor straight away.
What is cleaned on an industrial site?
Four areas, each on its own frequency in the written scope.
Sprinkler heads, smoke detectors and other fire equipment are not cleaned by us. Our cleaners work around them and report anything that looks damaged or covered to your site contact, so your fire services contractor can deal with it.
What paperwork will your safety team ask for?
Sent with the quote rather than after you sign.
Work above floor level is quoted with the access method named. If a job needs plant or a licence we do not hold, the quote says so before you sign.
Why do Melbourne industrial sites need a different clean?
Melbourne's west is one of Australia's main logistics corridors, feeding the Port of Melbourne. The sheds out there run long hours.
- The western corridor. Distribution sites in Truganina, Derrimut and Laverton North run long shifts, so cleaning windows are narrow and need planning
- Food-grade and cold storage. The west and the north carry plenty of both, and each needs a scope written to its own requirements rather than a general shed list
- Winter on the slab. Wet months bring water and grit in on every tyre, which is what turns pick aisles black between scrubs
- Newer high bay sheds. Racking in the growth corridors often runs higher than in older stock, so height access has to be planned rather than improvised
Cleaning around a running site is a scheduling problem before it is a cleaning one.
What should you check before signing an industrial cleaning contract?
Three things worth asking every tenderer.
How will they reach the top beam?
Racking dust appears in almost every industrial scope. A quote that lists high level cleaning without naming the equipment has not costed the work, so ask for the access method in writing.
How will they work around live traffic?
Many sheds rarely sit empty with every forklift parked. That means exclusion zones, spotters and agreed aisles, written into a traffic management plan and signed off before anyone starts.
What sits behind a rate per square metre?
Two sheds of the same floor area can need very different hours. Racking height, traffic, product type and attached office space all move the number more than area does, which is why we quote after a walkthrough.
Why choose Shining Services for your site?
You are letting a crew onto a live site. Here is what sits behind it.
Access method on the quote
Named for every job above floor level.
SWMS per task
Not one generic document for the site.
We decline what we cannot do safely
The quote says so before you sign.
$10 million public liability
Insurance cover on every visit, certificate on request.
Photo report every visit
Sent to your site contact.
Our guarantee
Our cleaners don't leave until you're happy with the work.
What do Melbourne customers say about us?
How is an industrial cleaning quote put together?
Four steps, usually inside a week. No obligation at any point.
Walk the site
Slab area, racking height and traffic, plus plant areas and any attached office.
Written scope and quote
Task by task with frequencies, the access method named, and a fixed price against it.
Induction and SWMS
Your site induction, traffic management, SWMS per task and your reporting contacts.
Service and reporting
A photo report each visit, with periodic work planned against your shutdown calendar.
Industrial sites are quoted after a walkthrough, not from a rate card. Racking height, traffic and product type drive the hours far more than floor area does.
What periodic work can be added?
Scheduled into the contract rather than sold as call-outs.
Full slab scrub
The whole floor in a shutdown window.
Hardstand and yard
High-pressure washing outside. Pressure washing →
High level dusting
Planned against the shutdown calendar.
Attached office and amenities
Scoped alongside the shed. Office cleaning →
External windows
Access quoted with the job. Window cleaning →
Make good cleaning
A full clean of the shed, office and amenities when your lease ends, ready for the landlord's handover inspection.
Which Melbourne suburbs do we cover?
Warehouses, distribution centres, factories and workshops across metropolitan Melbourne. Several sites around Melbourne? Request a walkthrough and we will scope them together.
Inner north and west
- Fitzroy
- Collingwood
- Brunswick
- Northcote
- Preston
- Coburg
- Footscray
- Yarraville
Victorian and Edwardian terraces, weatherboards, and converted warehouses where winter condensation and older timber floors shape the work.
CBD, inner east and bayside
- Melbourne CBD
- Docklands
- Southbank
- Richmond
- Camberwell
- Box Hill
- St Kilda
- Brighton
High-rise apartment towers alongside heritage family homes where building access windows and owners corporation rules decide the schedule.
Outer south east and western corridors
- Dandenong
- Glen Waverley
- Frankston
- Werribee
- Point Cook
- Cranbourne
- Narre Warren
- Tarneit
Family homes on large blocks where ducted heating registers, large floor plans, and outdoor paving are regularly booked together.
What do Melbourne site managers ask before signing?
How much does industrial cleaning cost in Melbourne?
We quote after a walkthrough rather than from a rate card. Racking height, traffic, product type and attached office space drive the hours far more than floor area does.
Can you clean while the warehouse is operating?
Yes. We work to a traffic management plan agreed with your site, covering exclusion zones, spotters and which aisles stay live. It is signed off before the first clean.
How do you handle working at heights?
Every job above floor level is quoted with the access method named. If a section needs plant or a licence we do not hold, the quote says so.
Do you clean sprinkler heads or smoke detectors?
No. Fire equipment is left to your fire services contractor. Our cleaners work around it and report anything that looks damaged or covered.
Do you do warehouse floor scrubbing?
Yes, in open runs, pick aisles and around racking bases. Tyre marks are lifted and line marking is cleaned rather than scrubbed away, with full slab work usually done in a shutdown window.
Can you clean food-grade or cold storage sites?
Yes, with the scope written to that site's requirements rather than a general shed list. Tell us at the walkthrough so it is priced correctly.
What hours do you work?
Seven days, from 6am to 10pm, so early mornings, evenings and weekends. Christmas, stocktake and planned maintenance windows book out early, so send us your calendar in advance.
What if something is missed?
Our cleaners don't leave until you're happy with the work. Anything your supervisor raises afterwards is followed up and reported back.
We stay until it's right
Our cleaners don't leave until you're happy with the work. For end of lease cleans, if you're not satisfied and tell us within 72 hours, we come back and re-clean.
Ready to book a site walkthrough in Melbourne?
Tell us the slab area, the racking height and your operating hours. We will walk it and come back with a written scope.
- Reply within 2 hours
- No lock-in contracts
- Open 6am to 10pm, 7 days
Monday to Sunday: 6:00 AM - 10:00 PM
Level 12, 123 Collins Street, Melbourne VIC 3000
Quote request submitted!
Thanks for choosing Shining Services. Our team is reviewing your request and will send your personalised quote within 2 hours.
Need any help?
What happens next?
- We'll review your requirements
- Prepare your detailed quote
- Contact you within 2 hours