Tile & Grout Cleaning in Adelaide
5.0 from 6 Google reviews

Tile and Grout Cleaning in Adelaide

Mop the floor, let it dry, and the grout lines still look dirty. Grout is porous, so the dirt sits inside it, and rotary scrubbing with extraction is what pulls it back out.

We charge $30 per square metre. A bathroom floor starts at $195 and a kitchen floor at $230, and you get a straight answer on what will lift before we start.

  • Rotary machine scrubbing that cleans deep into porous grout joints
  • Suits glazed ceramic, porcelain and quarry tiles
  • $30 per square metre, quoted in writing before we start
6am to 10pm
Seven days, plus a 24-hour emergency line
We stay until you're happy
Our guarantee on every clean
$10M
Public liability insurance
Free quotes
Fixed before we start

Why are your tiles clean but the grout is not?

Your tiles are probably fine. It is the grout between them that is holding everything.

Glazed tile is sealed, so dirt sits on top. Grout is cement and porous, so it drinks in every bucket of mop water and keeps what was in it.

Adelaide's hard water makes this worse. Dissolved minerals dry inside the grout line and lock the grey in, which is why mopping stopped working a while ago.

We clean, we do not regrout. Crumbling or stained-through mortar needs a tiler. Mould behind silicone belongs with mould cleaning, outdoor paving with pressure washing, and a whole-home reset with deep cleaning.

What is included in a tile and grout clean?

Every clean follows an agreed room scope, so you know what is scrubbed, rinsed and dried.

Bathrooms and wet areas

  • Wall tiles and shower recesses
  • Floor grout machine scrubbed
  • Soap residue and mineral scale lifted
  • Hobs, tiled steps and drain edges
  • Rinsed neutral and dried off

Kitchens and dining areas

  • Floor tiles and grout machine scrubbed
  • Splashbacks and cooker surrounds degreased
  • Skirting tiles and kickboards
  • Grease film off textured tile faces
  • Rinsed neutral and dried

Living rooms, hallways and entries

  • Large floors scrubbed edge to edge
  • Grout agitated with rotary brushes
  • Extra dwell time on doorways and paths
  • Slurry extracted with high-suction wands
  • Dried off so you can walk on it sooner

Quoted separately or referred on

  • Penetrating grout sealing, quoted after inspection
  • Recolouring and regrouting, a tiler's job
  • Mould in silicone, our mould service
  • Outdoor concrete and paving, our pressure washing
  • Natural stone, tell us before booking

Natural stone needs a different approach. Tell us in advance if your tiles are marble, limestone, slate or travertine, because acidic products etch them and we switch to neutral chemistry.

How does a tile and grout job run?

Four steps, from the first photo to the dry walkthrough.

Contact us
  1. Step 01

    Tell us the area

    Send your room types, rough square metres and a clear photo of the worst grout line so we can judge the condition.

  2. Step 02

    Fixed quote

    You get one price based on area and condition. If we think a stained grout line will not lift, we tell you before you book.

  3. Step 03

    The clean

    We apply a solution matched to your tile, let it dwell, scrub the grout lines with rotary brushes and extract the soil.

  4. Step 04

    Walk it with us

    We check the floor wet and again once it dries, because grout always looks cleaner wet. Our cleaners don't leave until you're happy with the work.

Why does Adelaide grout go dark so quickly?

Adelaide's mains water carries a lot of dissolved calcium and magnesium, and the seasons add their own dirt.

  • Hard water. The mineral load leaves chalky scale across shower tiles and bathroom floors, and it settles inside the grout where a mop cannot reach.
  • It varies across the city. Hardness changes from one supply zone to the next, so two homes a few suburbs apart can scale up at different rates.
  • The seasons work against you both ways. In the dry summer, open doors let fine dust blow in and stick to floor residue. In winter, wet footpaths track mud indoors and into entryway grout.

What should you check before booking tile and grout cleaning in Adelaide?

Ask these before you pay to clean grout that might need replacing.

Is the grout dirty, or is it damaged?

Wet a dark section with tap water and watch it. If it lightens while wet and darkens again as it dries, that is trapped dirt and cleaning will lift it.

If it stays dark when wet, the mortar itself has changed and you need recolouring or regrouting instead. We run this check before quoting, so you do not pay for the wrong job.

What goes on my floor, and is it safe for stone?

Glazed ceramic and porcelain handle a strong clean. Marble, limestone and travertine do not, because acidic products etch them and take the polish with them.

High pressure can also force water past indoor grout joints into the wall. Tell us the material when you book, not after we arrive.

Does sealing the grout actually help?

It buys you time. A penetrating sealer slows absorption so you can wipe up wine or oil before it sets.

It does not make grout stain-proof, it seals dirt in if the floor was not cleaned first, and it wears off and needs redoing.

Why per square metre instead of per hour?

Scrubbing grout is slow work, and on an hourly rate a badly soiled floor turns into an open bill. Ours is $30 per square metre, with a bathroom floor from $195 and a kitchen from $230.

Measure the rooms and photograph the worst grout line before you call, and the quote will not move on the day.

Grout always looks better wet. Judge the job once it is dry.

Why do Adelaide homes book us for tile and grout?

Grout needs mechanical scrubbing and chemistry that suits the surface. Here is how we work.

Local Marleston office

Our Adelaide crew is based at our Marleston office and covers the metro area and the Hills.

Priced by area

$30 per square metre, not an open hourly clock.

Honest scope up front

If your grout is stained through and will not lift, we tell you at the quote stage.

Method matches surface

Porcelain, ceramic and natural stone need different chemistry, so we identify your tile first.

Prices in writing before we start

You see the full price before anyone sets up.

A Shining Services cleaner working through a hotel corridor after hours

6am to 10pm, seven days

Book a time that suits the household, weekends included.

What do Adelaide customers say about Shining Services?

How much does tile and grout cleaning cost in Adelaide?

Published South Australian rates, including GST, charged by the square metre.

Per square metre

$30

Floor and wall tiles, scrubbed, extracted and rinsed.

Bathroom floor

From $195

A typical bathroom floor, grout lines included.

Kitchen floor

From $230

A typical kitchen floor, grout lines included.

Grout sealing is quoted separately after inspection, because it can only go on once the grout is clean and fully dry.

What moves your quote? The total square metres, the number of wet areas (walls take careful handwork), how built-up the soil is, and whether the tile is natural stone.

Get a fixed quote

Where do we clean tile and grout across Adelaide?

Homes across metropolitan Adelaide, the coastal suburbs and the foothills. Request a quote and tell us your suburb.

City and inner east

  • Adelaide CBD
  • North Adelaide
  • Kent Town
  • Norwood
  • Unley
  • Burnside
  • Prospect
  • Walkerville

We service everything from CBD apartments to classic bluestone and sandstone villas. Older period homes trap dust on picture rails, high skirting boards, and ceiling roses. We target these exact spots during our visits.

West and coastal

  • Ashford
  • Marleston
  • Glenelg
  • Henley Beach
  • Semaphore
  • West Lakes
  • Port Adelaide

We clean coastal properties and classic brick veneer homes. Salt air blowing off the Gulf leaves a sticky film on glass and jams up window tracks. We dedicate extra time to scrubbing these frames and windows so they slide perfectly.

North, south and the Hills

  • Salisbury
  • Elizabeth
  • Gawler
  • Mawson Lakes
  • Modbury
  • Marion
  • Morphett Vale
  • Noarlunga
  • Stirling
  • Aldgate
  • Mount Barker

We cover the newer estates out on the plains and the older stone properties up in the Hills. Spring pollen hits the Adelaide Hills hard. We recommend booking window and vent cleaning early in the season to keep allergens outside.

What do Adelaide customers ask about tile and grout cleaning?

How often do tiled areas need a professional clean?

Most Adelaide homes book every 12 to 18 months, and busy kitchens and daily-use showers sooner. The real signal is grout turning visibly darker than the tile around it.

Why does grout still look dirty after regular mopping?

Grout is porous mortar that soaks up dirty mop water. The mop cleans the smooth tile face but pushes dirty water into the grout lines, where it dries and darkens.

What is the difference between tile cleaning and grout cleaning?

Tile cleaning removes films, grease and soap sitting on a glazed face. Grout cleaning needs scrubbing and extraction to lift dirt trapped inside the cement joints.

Can cleaning bring grout back to its original colour?

If the grout is dirty from foot traffic or grease, rotary cleaning brings it close to its original tone. If it is stained through or worn down, cleaning cannot change the colour and it needs regrouting.

Do you clean bathroom and shower grout?

Yes, bathrooms are our most common booking. We clean wall tiles, shower bases, grout joints, screens and tiled ledges, with extra time on soap scum and mineral scale.

Can you remove mould from shower grout?

Surface marks and soap film lift with the standard clean. Mould growing behind silicone seals is a job for our mould cleaning service.

Is grout sealing the same as grout cleaning?

No. Cleaning removes embedded dirt and old residue, and sealing is a separate step on clean, dry grout that slows down absorption. We quote sealing separately after we have seen the floor.

What does tile and grout cleaning cost in Adelaide?

$30 per square metre, with a bathroom floor from $195 and a kitchen floor from $230. Send the room sizes and a photo, and we confirm a fixed price in writing before we start.

How long does the clean take and when can we walk on it?

Most single-level homes take two to three hours. The extraction removes the rinse water as we go, so you can usually walk on the floor in clean socks within an hour.

What other cleaning services do we offer in Adelaide?

Most customers book more than one. Same crews, same standards, one invoice.

Browse all services

We stay until it's right

Our cleaners don't leave until you're happy with the work. For end of lease cleans, if you're not satisfied and tell us within 72 hours, we come back and re-clean.

Ready for a tile and grout quote in Adelaide?

Send your room types, rough floor area and a photo of your grout lines. We reply with a fixed quote, usually within 2 hours during business hours.

  • Reply within 2 hours
  • No lock-in contracts
  • Open 6am to 10pm, 7 days
Call 0450 962 844

Monday to Sunday: 6:00 AM - 10:00 PM

3-5 Stirling St, Marleston SA 5033

Where are the tiles located?

Total square footage of tiled areas

Call Now