Pressure Washing in Darwin
4.8 from 34 Google reviews

Pressure Washing in Darwin

Pressure cleaning in Darwin is really two jobs. High pressure for concrete and pavers, and low pressure washing for render and painted walls, because the wet season grows things on a property that dirt alone never would.

We match the pressure to the surface and send you a dated photo report when we finish. Small areas start at $195 and a standard driveway is $215, both including GST.

  • High pressure or low pressure, chosen by surface
  • Gutters, roof soft washing and solar panels quoted
  • Dated before and after photo report
  • Published NT rates, from $195
6am to 10pm
Seven days, plus a 24-hour emergency line
We stay until you're happy
Our guarantee on every clean
$10M
Public liability insurance
Free quotes
Fixed before we start

What is pressure washing, and what is low pressure washing?

High pressure strips built up grime off hard surfaces that can take it. Concrete, pavers, exposed aggregate, brick, carports and pool surrounds.

Low pressure washing does the opposite. A cleaning solution does the work at gentle pressure, for surfaces that force would damage, such as render, painted walls and timber decking.

Most Darwin properties need both, on different surfaces, in the same visit. We decide which surface gets which before the hose comes out.

When is the best time to book in Darwin?

The Territory calendar decides this, not a generic maintenance schedule.

May and June, after the rain stops

The wet season runs November to April. Once it ends, whatever grew through it stops spreading and comes off properly.

September and October, before the build up

The dry leaves red earth dust on everything. Clearing it before humidity climbs again means the build up has less to feed on when it arrives.

Before November, ahead of cyclone season

A clean yard is easier to clear of loose material before the storms arrive. It is also the last dry window to get paths and pavers clean before the wet.

What surfaces do we clean?

Each one gets the method it can handle, decided on site before a hose comes out.

High pressure surfaces

  • Concrete driveways and paths
  • Brick and stone pavers
  • Exposed aggregate
  • Carports and garage floors
  • Pool surrounds and patios

Low pressure surfaces

  • Rendered and painted walls
  • Timber decking and pergolas
  • Cladding and weatherboard
  • Metal and timber fencing

Around the property

  • Verandahs and balconies
  • Retaining walls and steps
  • Bin areas

Roof, gutters and solar (quoted)

  • Roof soft washing for tiles and Colorbond
  • Gutter cleaning
  • Solar panel cleaning

Darwin specific jobs

  • Post wet season washdowns
  • Red earth dust off rural driveways
  • Salt film on coastal fencing and walls
  • Bat and bird droppings on patios

What happens on the day?

You do not need to be there while we work.

Contact us
  1. Step 01

    Surface check first

    We walk the property and decide what takes high pressure and what takes low pressure. You get told before anything starts.

  2. Step 02

    Growth treated, not just blasted

    A cleaning solution goes on the growth first, so it is killed rather than only stripped off the top.

  3. Step 03

    Runoff kept off the street

    We direct wash water to garden and soakage areas rather than into the kerb and the stormwater drain.

  4. Step 04

    Dated photo report

    Before and after on every area we touched. Our cleaners don't leave until you're happy with the work.

Why do Darwin surfaces get so much worse than southern ones?

Because the climate does the work. Almost all of the year's rain falls in the wet season, from November to April.

  • Concrete and pavers stay damp for weeks at a time through the wet, which is all growth needs
  • Humidity stays high through the wet, so shaded surfaces never fully dry between storms
  • The soils across the Top End are red, so the dust that settles through the dry is iron rich earth, not grey grit
  • Coastal suburbs get salt on top of it, which leaves a film on metal and glass

What should you know before anyone points a hose at your house?

Four things worth asking about on any pressure cleaning quote.

Not every surface takes high pressure

Concrete and pavers can. Render, paint and soft timber cannot, and a hardware store machine at full pressure is how DIY jobs end in patchy stripped walls.

Render needs a gentle hand

High pressure can lift a render finish. We wash render at low pressure with a wide fan tip rather than a narrow jet.

Pressure alone does not stop regrowth

Blasting growth off the surface leaves part of it behind in the pores, and that part grows back. A cleaning solution that kills it lasts longer than force alone.

Where the dirty water goes matters

Wash water should not run into a stormwater drain. We direct runoff to garden and soakage areas rather than the kerb.

Why do Darwin property owners book us?

Six reasons, one line each.

Darwin based team

We work out of 93 Smith Street in Darwin City, not an interstate call centre.

Both methods, one visit

High pressure and low pressure gear on the same visit, so no surface gets the wrong one.

Photo report every job

Dated before and after shots of each area, not a text message saying it is done.

Happy before we leave

Our cleaners don't leave until you're happy with the work.

Published NT rates

A starting price on the page, not a number you only hear after the site visit.

A Shining Services cleaner working through a hotel corridor after hours

Honest about regrowth

We say up front what will return in the next wet, rather than selling a permanent result.

What do Darwin customers say about us?

How much does pressure cleaning cost in Darwin?

Published NT starting rates including GST.

Job NT rate
Up to 20 square metres, such as an entry path or small patio $195
Standard driveway $215
Larger areas, house walls, full exterior and commercial Quoted on site
Roof soft washing, gutters and solar panels Quoted on site

Larger areas are priced by the square metre once we have seen the surface and how much growth is on it. The quote is written, and it holds unless you change the scope.

Get a written quote

Do you clean commercial premises in Darwin?

Yes. Car parks, loading docks, shopfronts, warehouse floors and bin bays, across Winnellie, Berrimah, East Arm and the Darwin Business Park.

Timing matters more for trade than for homes. Hospitality and retail exteriors want to be clean before the dry season visitors arrive, not halfway through it.

We work between 6am and 10pm, seven days, so a shopfront can be done before you open or after you close. On industrial sites we direct runoff away from stormwater rather than into it.

What else gets booked with a wash?

One visit while the gear and the crew are already on site.

Window cleaning

Worth doing after the walls, not before. Up to 10 windows from $170. See window cleaning

Mould cleaning

For surface growth that has moved from the outside wall to the inside one. From $315. See mould cleaning

Tile and grout

Indoor floors where the grout line needs extraction. $38 per square metre. See tile and grout

End of lease cleaning

Driveways and carports often sit on the exit inspection list. From $400. See end of lease

Deep and spring cleaning

The inside equivalent of a post wet reset. From $315. See deep cleaning

Office cleaning

Regular indoor cleaning for the same commercial sites we wash outside. See office cleaning

Which Darwin suburbs do we cover?

Same NT rates across the whole service area, city out to the rural blocks. Suburb not listed? Send it through and we will confirm the same day.

City and coastal

  • Darwin CBD
  • Larrakeyah
  • Stuart Park
  • The Gardens
  • Fannie Bay
  • Parap
  • Cullen Bay
  • Nightcliff

Coastal salt air coats glass and louvre blades, requiring extra care on tracks.

Northern suburbs

  • Casuarina
  • Alawa
  • Wagaman
  • Leanyer
  • Karama
  • Malak
  • Marrara
  • Wanguri

High residential rental movement makes bond cleaning very common across these suburbs.

Palmerston and rural

  • Palmerston
  • Berrimah
  • Winnellie
  • Howard Springs
  • Humpty Doo

Larger family blocks and sheds often combine regular cleans with outdoor pressure washing.

What do people ask before booking a pressure clean?

How much does pressure cleaning cost in Darwin?

Small areas up to 20 square metres start at $195 and a standard driveway is $215, both including GST. Larger areas, house walls, roofs and commercial sites are quoted on site by the square metre, because price follows how much growth is on the surface, not just its size.

Will high pressure damage my render or paint?

It can, which is why we do not use it on either. Render and painted walls get a low pressure wash with a cleaning solution, and high pressure is kept for concrete, pavers and brick.

Do you clean roofs, gutters or solar panels?

Yes. Roofs get a soft wash at low pressure rather than a high pressure jet, and gutters and solar panels can go on the same visit. All three are quoted once we have seen the property.

Will the mould and algae just grow back?

Some of it will, because the Darwin wet season brings the same conditions back every year. A wash that kills the growth lasts longer than pressure that only strips the visible layer off.

Do you use my water and my power?

Yes. We need an outdoor tap and a power point on the property, so please check both are working before we arrive.

Will oil stains come out of my concrete?

Usually they fade rather than vanish. Fresh oil lifts well, while oil that has soaked into the concrete over years comes back much lighter but can still be visible. We tell you which one you have before we quote.

How often should this be done in Darwin?

Once a year after the wet suits most properties. Coastal homes may need metal fencing and walls washed more often because of the salt.

Do I need to be home?

No, as long as we can reach the areas being cleaned. The photo report lands afterwards so you can see exactly what was done.

What else do we clean in Darwin?

Most customers book more than one. Same crews, same standards, one invoice.

Browse all services

We stay until it's right

Our cleaners don't leave until you're happy with the work. For end of lease cleans, if you're not satisfied and tell us within 72 hours, we come back and re-clean.

Ready to book a pressure clean in Darwin?

Tell us the surfaces, roughly how big the area is and your suburb. A written quote comes back with the method for each surface listed, and the price holds unless you change the scope.

  • Reply within 2 hours
  • No lock-in contracts
  • Open 6am to 10pm, 7 days
Call 0483 982 111

Monday to Sunday: 6:00 AM - 10:00 PM

93 Smith St, Darwin City NT 0800

What surface needs pressure washing?

Total square footage of surface to be cleaned

What type of stains are present?

Call Now